If the automatic packaging machine fails, it will have a great impact on the production of the enterprise. What should I pay attention to when using the automatic packaging machine? How to maintain it?
(1). The working temperature of the machine is -10℃-50℃, the relative humidity is not more than 85%, there is no corrosive gas in the surrounding air, and it is used in an environment without dust and danger.
(2). The packaging machine should be operated by a fixed person and must be a person trained by the manufacturer, who can be proficient in the startup and filling procedures, and be able to set simple parameters and change parameters.
(3). The packaging machine is not allowed to be tilted or bumped during the handling process, and it cannot be placed down for handling.
(4). The automatic packaging machine must have a reliable grounding device during installation.
(5). When working, ventilate first and then energize. When shutting down, cut off the power first and then cut off the gas.
6). Machine debugging personnel must be strictly trained by the manufacturer, and be able to master the machine’s working procedures, operating modes, working status, common troubleshooting, and handling, and it is strictly forbidden to operate the main parameters of the machine without training.
(7). The metering and filling parts should be cleaned in time after the machine is shut down. For example, sugar, protein powder, etc. are packed, and the discharge nozzle must be cleaned every day after shutting down to prevent corrosion.
(8). The photoelectric tracking light-emitting head should also be cleaned regularly to ensure small errors in the photoelectric tracking.
(9). The scattered materials on the material tray should be cleaned up in time to keep the surface of the machine clean and tidy.
(10). Clean the dust in the electric control box regularly to prevent malfunctions such as poor contact.
(11). Pay attention to the waterproof, moisture-proof, anti-corrosion, and rat-proof of the electrical parts. The inside of the electric control box and the wiring terminals must be kept clean to prevent electrical failure.
(12). Regularly check the screws of each part of the packaging machine to avoid loosening.
(13). Lubricate the gears of the packaging machine, the oil hole of the bearing with a seat, and the moving parts of the packaging machine regularly. When adding lubricating oil, please be careful not to drop the oil on the transmission belt to prevent slipping and loss of rotation or belt aging and damage.