On September 10, 2021, Sywen Packaging received an inquiry from the Philippines regarding the automatic coconut oil pouch packing machine, with the content as follows:
We are a cold-pressed coconut oil manufacturer, need to pack 10 ML small pouches of coconut oil, please quote the best CIF Manila price.
Our reply on September 10, 2021:
Please send us the coconut oil packaging bag sample and size of your company, so that we can customize the suitable packaging solution.
The customer’s email on September 14, 2021:
It is the back-seal pouch, the type of the bag is shown in the figure below. The length of the bag is 130 mm and the width is 35 mm.
Our reply on September 14, 2021:
What is the required filling speed and accuracy?
The customer’s email on September 16, 2021:
Filling 10ML coconut oil, 30 bags/minute, the weight error of each bag is about 1 ML.
Our reply on September 17, 2021:
Does you need the automatic coconut oil pouch filling machine with automatic coding function?
The customer’s email on September 21, 2021:
No, our production workshop has an automatic inkjet coding machine, so the coconut pouch packing machine doesn’t need to have the automatic coding function.
Our reply on September 22, 2021:
According to your company’s product characteristics, pouch type, and size, we recommend that you use the SY-280 automatic small liquid pouch packing machine, piston pump metering, and filling, it is widely used for filling viscous liquids with good fluidity. The width of the plastic packaging film roll is 80-280mm, which can fill and seal back seal, three-side seal, or four-side seal liquid pouches. Please see the detailed quotation in the attachment.
Note: This type of automatic liquid packaging machine must be tested with clients’ plastic laminated packaging film rolls. Because after forming bags, filling, and sealing, the details of the sealing effect need to be adjusted according to the customer’s requirements and the packaging roll film material.
The customer’s email on September 28, 2021:
Do the bags with different sealing styles or different sizes can be packed by one machine?
Our reply on September 29, 2021:
Based on our company’s packaging industry experience and customer feedback on the use of machines, we strongly recommend that one machine is only used for one type of sealing type and one size of the packaging pouch. Repeated disassembly of the cutter and the bag former will greatly damage the stability of the sealing effect.
The customer’s email on October 7, 2021:
We once saw the sealing effect of this kind of liquid pouch filling machine, the deformation of the pouch was very serious, the cut edge of the sealing edge had burrs, the width of the left and right sides of the back sealing edge were different, the sealing edge was not tight, etc. What causes these quality problems?
Our reply on October 8, 2021:
These quality problems may have something to do with the machine’s bag forming device, whether the plastic packaging film roll pulling system is smooth, the controller and etc. If you are worried about the quality of the machine, please send us the printed laminated packaging roll film, and we will make the packaging test for you free of charge. After seeing the packaging effect of the automatic liquid pouch filling machine, then decide whether to purchase.